Hi, if temperature are 90C (engine works with 500 - 1000 rpm) oil pressure 2 bar, that ok or bad? If engine works with 1200 rpm oil pressure turn 3 bar!
2,5 16v Oil Pressure
Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen
-
-
Original von Bpa4
Hi, if temperature are 90C (engine works with 500 - 1000 rpm) oil pressure 2 bar, that ok or bad? If engine works with 1200 rpm oil pressure turn 3 bar!
someone knows how mach rpm will be if engine works in no-load (idle running) speed? -
Hello Bpa4,
the nominal idle speed is controlled depending on engine-temperature. At + 70°C. the idle speed should be 940 +/- 50 rpm. If it is not Ok please check: Coolant temperature, Air flow sensor position indicator, Idle speed contact on throttle valve switch, contol unit. The oil pressure at idle speed should be 3 bar (Engine M 102.990). -
Original von evoschrauber
Hello Bpa4,
the nominal idle speed is controlled depending on engine-temperature. At + 70°C. the idle speed should be 940 +/- 50 rpm. If it is not Ok please check: Coolant temperature, Air flow sensor position indicator, Idle speed contact on throttle valve switch, contol unit. The oil pressure at idle speed should be 3 bar (Engine M 102.990).
Hello, Evoschrauber,
Thanks for answer. -
Hi,
das habe ich auch gehabt,biss ich anderen Geber eingebaut habe .Der sizt unter Öl filter am Block.
PS: was ich noch gemerkt habe , das mein motor läuft besser mit ARAL 10W40 besser als mit Shell 0W30 sogar im Öl verbrauch ist auch unterschid .
Rear one,
I had, bit that also I other giver inserted. Block sizt under oil filteram.
HP: which I still noticed, that my engine runs better with ARAL 10W40 better than with Shell 0W30 even in the oil consumption
Greet MerinGruß Viktor
Rein gucken macht neidisch , raus gucken macht stolz!!! -
Original von Merin
Hi,
das habe ich auch gehabt,biss ich anderen Geber eingebaut habe .Der sizt unter Öl filter am Block.
PS: was ich noch gemerkt habe , das mein motor läuft besser mit ARAL 10W40 besser als mit Shell 0W30 sogar im Öl verbrauch ist auch unterschid .
Rear one,
I had, bit that also I other giver inserted. Block sizt under oil filteram.
HP: which I still noticed, that my engine runs better with ARAL 10W40 better than with Shell 0W30 even in the oil consumption
Greet Merin
Hi, Greet Merin,
I have suspicion about oil quality. So in future try one of your offer.
rgds, Bpa4
-
Teilen
- Facebook 0
- Twitter 0
- Google Plus 0
- Reddit 0
-
Benutzer online 1
1 Besucher